First, the use of security bundling method
When the steel wire rope is lashing the steel pipe, it is necessary to use a safe and reliable method to fix it. First of all, it is necessary to tie the steel pipe through the correct method, and pay attention to the rope circle alternately separate. Secondly, when tying the steel pipe, it is necessary to ensure that the rope is tightly tied and not loose to ensure its stability. After the lashing is completed, it is necessary to check that the rope is secure and take measures to strengthen the fastening.
Two, the use of wire rope iron ring fixed
The most common method of fixing the steel wire rope between the steel pipe is to use the steel wire rope iron ring fixing method. This method needs to tie iron rings on both ends of the wire rope, then pass the wire rope through the iron ring, wrap the wire rope around the steel pipe, and tightly fix the steel pipe surface. At the same time, the bending Angle of the bending wire rope should be controlled within the allowable bending range of the metal to avoid excessive bending of the wire rope, resulting in damage or failure.
Third, the use of fixed card fixed
When the steel wire rope is lashing the steel pipe, a fixed clamp can also be used to fix the wire rope. This method requires fixing a bent fixing clamp on the surface of the steel pipe and passing the wire rope above or below it to make it firmly fixed on the steel pipe. When using the fixed card, it is necessary to ensure that it is bent properly and maintains good contact with the steel pipe to ensure its stability.
To sum up, fixing the wire rope on the steel pipe needs to take the correct method, and it needs to be firmly fixed to ensure its safety and stability. At the same time, when fixing the wire rope, care should be taken not to over-stretch it to avoid causing the wire rope to crack, resulting in safety hazards.
